Deutsch 
English 
UV lamp drivers - design overview
Efficient. Safe. A perfect fit.
Uniform and stable radiation is critical for effective UV-C applications. Our ballasts are precisely matched to each UV-C lamp for reliable ignition, consistent output and maximum lamp life.
Individual solutions instead of standardized devices
ZED UV lamp drivers are available in different shapes and sizes, depending on the power, functionality and number of lamps to be operated. This gives you the flexibility to meet even the most complex requirements.
Initial orientation made easy
Since a complete presentation of all combinations of UV lamp drivers and corresponding UV-C lamps would go beyond the scope of this website, you will find here an overview of our most important families of equipment - as an introduction and for initial orientation.
Our lamp drivers are available in different form factors, device families or ballast designs, depending on the wattage, functionality and number of lamps to be operated.
-
The family name indicates the design (e.g. E2x80RS) suitable for lamps in the specified wattage range.
-
The units are each optimized for operation with the desired lamp(s) (e.g. GHO36T5) and marked with the common ZED ballast names (here: EVG2x65-80W/880mA).
You can access our ballast designs grouped by power range directly via the selection menu or the illustrations above.
Scrolling down you will find a brief characterization of the ballasts in terms of lamp type (2pin, 4pin), functionality (e.g. standard, preheat, controllable) and power range. From here you can access further details and a sample selection of suitable common lamps.
You can use the filters on the left to further narrow your search results.
(Ballasts for other voltage ranges are available upon request).
Have a question? Contact us today!
Work with us to find the perfect solution for your UV application.
EVG E40PH/24V
UV lamp driver
for 4 pin UVC lamps,
lamp power 5...50W,
supply voltage 24V DC,
preheat start for more
frequent switching
EVG E2x200PHplus
UV lamp driver
for 2x 4pin UVC lamps,
lamp power 40...160W,
PLC via RS485 Modbus
EVG E200PH
UV lamp driver
for 4pin UVC lamps,
lamp power 30...180W,
preheat start for more
frequent switching
EVG E2x200PH
UV lamp driver
for 2x 4pin UVC lamps,
lamp power 30...180W,
preheat start for more
frequent switching
E2x200PH-S
ballast with enhanced operation features for two 4-pin UV-lamps, lamp power 40...200W
EVG E400PHplus
UV ballast with parameter adjustment and remote control for 4-pin UV-lamps, lamp power up to 400W
E2x300PH-S
ballast with enhanced operation features for two 4-pin UV-lamps, lamp power up to 350W
EVG E2x300PHplus
UV ballast with parameter adjustment and remote control for two 4-pin UV-lamps, lamp power up to 350W
E3x300PHplus-R
ballast with parameter adjustment and remote control for three 4-pin UV-lamps, lamp power 3x up to 325W
E4x300PHplus-R
ballast with parameter adjustment and remote control for four 4-pin UV-lamps, lamp power up to 325W
EVG E400PH-S
UV ballasts with enhanced operation features for 4-pin UV-lamps, lamp power up to 400W
EVG R2x300PHplus
UV ballast with parameter adjustment and remote control for two 4-pin UV-lamps, lamp power up to 350W
R3x300PHplus-R
ballast with parameter adjustment and remote control for three 4-pin UV-lamps, lamp power up to 325W
R400PHplus-B
ballast with parameter adjustment and remote control for 4-pin UV-lamps, lamp power up to 400W
R4x300PHplus-R
ballast with parameter adjustment and remote control for 4-pin UV-lamps, lamp power up to 325W
E1200PHplus-R
ballast with parameter adjustment and remote control for 4-pin UV-lamps, lamp power up to 1200W
E2x600PHplus-R
ballast with parameter adjustment and remote control for two 4-pin UV-lamps, lamp power up to 600W
E600PHplus-B
ballast with parameter adjustment and remote control for 4-pin UV-lamps, lamp power up to 600W
R1200PHplus-R
ballast with parameter adjustment and remote control for 4-pin UV-lamps, lamp power up to 1200W
R2x600PHplus-R
ballast with parameter adjustment and remote control for two 4-pin UV-lamps, lamp power up to 600W
R600PHplus-B
ballast with parameter adjustment and remote control for 4-pin UV-lamps, lamp power up to 600W
