Deutsch 
English 
UV Ballast family - UV lamp drivers for operating two UVC lamps with 2 pin connector
-
Lamp power: 30...180W
-
Lamp current: up to 2,0 A
-
Dimensions: 248 x 105 x 59 mm (9.76 x 4.13 x 2.32 inch)
-
No. of Lamps: 2
Features
- instant start ballasts for 2-pin UV-lamps
- less wiring - only 2 wires per lamp
- double device - powers two lamps, independent lamp operation even if one lamp is defective or disconnected
- lamp and ballast status indication - green and red LEDs - potential free relay contacts
- standard operation - easy system start-up "plug and play" - no DIP-switch / no RS485 interface - no adjustable operation parameters - no remote operation control
- metal housing, designed for optimal thermal flow
- push-in contacts for quick installation
- high efficiency
- active power factor correction (PFC) low THD according to EN 61000
Technical Specification
| supply voltage: | 230V AC ± 10% /45-65Hz (115V AC types on request) |
|---|---|
| efficiency: | >90% |
| operation temperature: | max. 50°C (122°F) at TC-point |
| ambient temperature: | 0 - 40°C (32 - 104°F) |
| IP code: | IP20 |
| dimensions (LxWxD): | 248 x 105 x 59 mm (9.76 x 4.13 x 2.32 inch) |
UV lamp types
- GHO64T5
- TUV 64T5 HO
(ballasts for other UV lamp types available on request)
